Aufgrund der hohen Rückstände der letzten Jahre bei unseren Lieferanten kann es noch immer zu Lieferengpässen kommen, sodass die angegebene Lieferzeit abweichen kann. Natürlich setzen wir dennoch alle Mittel in Bewegung, um Ihre Bestellung so schnell wie möglich zu liefern. Kontaktieren Sie uns gerne, um Ihnen für bestimme Produkte eine genauere Auskunft geben zu können.
We offer hidden joist hangers in to versions: EL or EL-S. The difference lies in the kind of application. The EL connects the main beam with secondary beam connections. The EL-S connects secondary beam connections with supporters. The difference becomes visable through the existing angle of the EL, while the EL-S doesn't have an angle.Hidden joist hangers are used as invisable connection elements between woods. The most used version of hidden joist hangers it the EL-60.
We exclusively offer joist hangers of the brand Simpson Strong-Tie. Reason for that is: we are convinced by the quality and the manufacturer- the market leader- comes out with the most innovations for thei field.
The advantage is the except from the top view, invisable connection of the beems. You mainly use this product for optical reasons. But also the installation is faster and easier compared to common joist hangers. The hidden joist hangers are made from aluminium and for this more corrision-resistant (for example against condensation) and more durable than common joist hangers made from galvanized steel. Hidden joist hangers can be used for connections at bevels 15° to 165°. Standard joist hangers can be used only for connections with an 90 degree angle.
To full-fill the requirements you have to use fully threaded screws from the manufacturer SPAX with the length 60 to 120 mm for the connection. The required screws for the application you can find in the chart below.
If a 90 degree angle works and you are fine with visable connections, you also can alternatively with cheaper Joist Hangers.
If you value completely invisable connections, buy Hidden Joist Hanger ATF.
Manufacturer text:
Hidden joist hangers EL-S are made from 10 mm thick aluminium plates.
With the EL-S hidden joist hanger you are able to connect support - and secondary beams in the most easy way. Also connections between main- and secondary beams are possible, for exampe for laying a collar tie between higher inferior purlins.
Further more beveled connections with the connector are possible. Connections tilted upwards are possible, but because of the limited access of the horizontal nailholes, we recommend the EL hidden joist hanger at this part. Connections tilted downwards are only admissible for special wood jointing method, when the acute angle of the horizontal bevel 15° - 45° is.
The high level of prefabrication allows a short installation time on the construction site.
The EL hidden joist hanger is available in 5 differernt sizes.
| Type.No. | Measure A | Measure B | Measure C |
Anzahl SPAX® Screws 5,0x70 (im Nebenträger)
|
* |
CNA Ribbed nails 4,0xl |
| EL30-B | 30 | 55 | 120 | 3 | 1 | |
| EL40-B | 40 | 55 | 120 | 6 | 1 | |
| EL60-B | 60 | 55 | 120 | 9 | 2 | |
| EL80-B | 80 | 55 | 120 | 12 | 3 | |
| EL100-B | 100 | 55 | 120 | 15 | 4 | |
| ELS30-B | 30 | - | 178 | 3 | 5 | |
|
ELS40-B |
40 | - | 178 | 6 | 8 | |
| ELS60-B | 60 | - | 178 | 9 | 13 | |
| ELS80-B | 80 | - | 178 | 12 | 15 | |
| ELS100-B | 100 | - | 178 | 15 | 19 |
Deutsch
