Mafell Carpenter's Chain Saw ZSX TWIN Ec

The ZSX-TWIN Ec carpenter´s chain saw is a highly practical tool for large timbers.

• Despite tremendous nominal output of 6000 Watt, the single-phase ZSX-TWIN Ec weighs just 20 kg (44.1lbs). The low weight-to-power ratio allows the saw to cut as deep as 400 mm (15 3/4 in.).
• In timber construction and when fitting solid timber walls, corners frequently need to be cut out. Thanks to the vertical cutting edge, recesses and half-lap joints can be produced quickly and exactly. The arduous task of turning the work simply does not arise.
• At the core of the MAFELL ZSX-TWIN Ec are the two 3000-Watt single-phase motors. They run at the same time on two 230 V phases of the three-phase electric power system.
• The ZSX pivots from -15° to 60° exactly according to the scale.

Applications

• Rip cuts and cross-cutting
• Recesses
• Compatible materials include solid wood and laminated beams

Technical data

• Cutting depth: 400 mm
• Cutting depth at 15°: 386 mm
• Cutting depth at 30°: 346 mm
• Cutting depth at 45°: 282 mm
• Cutting depth at 60°: 199 mm
• Tilts in both directions: -15 - 60°
• Nominal No. of strokes – no load: 21000 1/min
• Nominal power input: 2 x 3000 W
• Weight: 24,2 kg
• Universal motor: 230 V / 50 Hz

Lieferumfang

• 1 Carbide-tipped ripping chain TWIN HM 400; Ref. No. 006977
• 1 Carbide-tipped fine sawing chain HM 400; Ref. No. 006972
• 1 Trolley ZSX-TWIN Ec
• 1 Glider for use with guide rail; Ref. No. 205934
• 1 Parallel fence; Ref. No. 204591
• 1 Combination screw driver 6 mm; Ref. No. 093272
• 1 Open-end spanner 13 mm; Ref. No. 093008
• 1 Mains cable 10 m (32.8 ft); Ref. No. 087612